Drinking water quality in Spay
PFAS in drinking water
No PFAS results have been published for Spay yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
Water report for Spay
Get the free water report for Spay, plus an alert whenever new official results are published.
Official assessment
The latest official test passed all quality requirements.
„Une flore aérobie importante empêche de vérifier la présence éventuelle de germes tests de contamination. De ce fait, ce résultat apparaît bactériologiquement douteux, même si aucun élément n'indique de dégradation de la qualité chimique de l'eau (aucune turbidté ou coloration). Un nouveau contrôle va être réalisé.“
Show all 17 official measurements
| Parameter | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 10 mg/L | ≤ 50 mg/L | within limit |
| Nitrite | <0,010 mg/L | ≤ 0.5 mg/L | within limit |
| Lead | 0.3 µg/L | ≤ 10 µg/L | within limit |
| Copper | 0.0405 mg(Cu)/L | ≤ 2 mg(Cu)/L | within limit |
| Nickel | 3.8 µg/L | ≤ 20 µg/L | within limit |
| Cadmium | 0.019 µg/L | ≤ 5 µg/L | within limit |
| Chromium | 0.5 µg/L | ≤ 50 µg/L | within limit |
| Escherichia coli | <1 n/(100mL) | ≤ 0 mL) | within limit |
| Enterococci | <1 n/(100mL) | ≤ 0 mL) | within limit |
| Coliform bacteria | ILLISIBL n/(100mL) | ≤ 0 mL) | not assessed |
| pH | 7.5 unité pH | 6.5–9 unité pH | within limit |
| Water hardness | 17.8 °f | no limit | informational |
| Electrical conductivity | 494 µS/cm | 200–1,100 µS/cm | within limit |
| Chloride | 23.5 mg/L | ≤ 250 mg/L | within limit |
| Sulphate | 49.2 mg/L | ≤ 250 mg/L | within limit |
| Iron | 40 µg/L | ≤ 200 µg/L | within limit |
| Turbidity | 0.91 NFU | ≤ 2 NFU | within limit |
Frequently asked questions
Is tap water in Spay safe to drink?
Yes. The latest official test (25 June 2026) checked the tap water in Spay and it passed every requirement.
How high are PFAS levels in Spay's drinking water?
No PFAS results have been published for Spay yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Spay?
The water hardness in Spay is 17.8 °f (medium). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 28 August 2026.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=72344
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 28 August 2026
- Supply networks
- SIDERM ESU, SIDERM YVRE LE POLIN
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.