Drinking water quality in Moncé-en-Belin
PFAS in drinking water
No PFAS results have been published for Moncé-en-Belin yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
Water report for Moncé-en-Belin
Get the free water report for Moncé-en-Belin, plus an alert whenever new official results are published.
Official assessment
The latest official test passed all quality requirements.
„Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés.“
Values to watch
These values are at least halfway to their legal limit, or over it.
| Parameter | Value | Limit | Status |
|---|---|---|---|
| Nickel | 51.3 µg/L | ≤ 20 µg/L | exceeded |
Show all 17 official measurements
| Parameter | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 10 mg/L | ≤ 50 mg/L | within limit |
| Nitrite | <0,010 mg/L | ≤ 0.5 mg/L | within limit |
| Lead | 2.1 µg/L | ≤ 10 µg/L | within limit |
| Copper | 0.304 mg(Cu)/L | ≤ 2 mg(Cu)/L | within limit |
| Nickel | 51.3 µg/L | ≤ 20 µg/L | exceeded |
| Cadmium | <0,010 µg/L | ≤ 5 µg/L | within limit |
| Chromium | 0.4 µg/L | ≤ 50 µg/L | within limit |
| Escherichia coli | <1 n/(100mL) | ≤ 0 mL) | within limit |
| Enterococci | <1 n/(100mL) | ≤ 0 mL) | within limit |
| Coliform bacteria | <1 n/(100mL) | ≤ 0 mL) | within limit |
| pH | 7.6 unité pH | 6.5–9 unité pH | within limit |
| Water hardness | 18 °f | no limit | informational |
| Electrical conductivity | 472 µS/cm | 200–1,100 µS/cm | within limit |
| Chloride | 22.9 mg/L | ≤ 250 mg/L | within limit |
| Sulphate | 49.3 mg/L | ≤ 250 mg/L | within limit |
| Iron | 15 µg/L | ≤ 200 µg/L | within limit |
| Turbidity | <0,30 NFU | ≤ 2 NFU | within limit |
Frequently asked questions
Is tap water in Moncé-en-Belin safe to drink?
Yes. The latest official test (9 April 2026) checked the tap water in Moncé-en-Belin and it passed every requirement.
How high are PFAS levels in Moncé-en-Belin's drinking water?
No PFAS results have been published for Moncé-en-Belin yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Moncé-en-Belin?
The water hardness in Moncé-en-Belin is 18 °f (medium). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 28 August 2026.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=72200
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 28 August 2026
- Supply networks
- SIDERM SAINT MARS D'OUTILLE, SIDERM ESU, SIDERM YVRE LE POLIN
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.