PFAS in tap water, Hampden County, Massachusetts
None of the 12 water systems had a PFAS-4 compound above the 3 to 4 ng/L reporting limits at the latest sample. That's below the lab limit, not zero.
12 community water systems · 418,613 people served · newest sample October 8, 2025
Water systems in Hampden County
| Water system | People served | PFAS-4 at the latest sample | Entry points | Latest sample |
|---|---|---|---|---|
| Springfield Water and Sewer Commission | 169,170 | below the 3 to 4 ng/L reporting limit | 1 | November 14, 2023 |
| Chicopee Water Dept (MWRA) | 55,560 | below the 3 to 4 ng/L reporting limit | 1 | October 7, 2024 |
| Westfield Dpwwater Division | 41,094 | below the 3 to 4 ng/L reporting limit | 6 | July 16, 2025 |
| Holyoke Water Works | 37,838 | below the 3 to 4 ng/L reporting limit | 2 | December 3, 2024 |
| West Springfield DPW Water Division | 28,835 | below the 3 to 4 ng/L reporting limit | 1 | January 6, 2025 |
| Agawam Water Department | 28,692 | below the 3 to 4 ng/L reporting limit | 1 | February 14, 2025 |
| East Longmeadow DPW Water Dept | 16,358 | below the 3 to 4 ng/L reporting limit | 1 | January 6, 2025 |
| Longmeadow Water Dept | 15,853 | below the 3 to 4 ng/L reporting limit | 1 | July 1, 2024 |
| Wilbraham Water Dept (MWRA) | 8,533 | below the 3 to 4 ng/L reporting limit | 1 | December 4, 2024 |
| Southwick Water Dept | 7,669 | below the 3 to 4 ng/L reporting limit | 2 | November 7, 2023 |
| Palmer Water District No.1 | 4,789 | below the 3 to 4 ng/L reporting limit | 3 | October 8, 2025 |
| Monson Water and Sewer Dept | 4,222 | below the 3 to 4 ng/L reporting limit | 3 | August 30, 2023 |
Not sure which one is yours? The systems report their own service areas to EPA. Check your water bill or your utility's Consumer Confidence Report.
Cities and towns
ZIP codes in Hampden County
Census ZIP code tabulation areas that overlap the county. A ZIP served by one system opens that system's page; a ZIP shared by several systems lists them.
How to read these numbers
We compare PFAS-4 (PFOA + PFOS + PFNA + PFHxS) with this site's 0.5 ng/L benchmark, the same line as on the European pages. UCMR 5 reporting limits are 3 to 4 ng/L. So any quantified PFAS-4 compound is above the benchmark, and a clean result reads "below the 3 to 4 ng/L reporting limit", never zero. The US legal limit is the 4 ng/L federal MCL for PFOA and PFOS, which systems must meet from April 26, 2029 ("above the 2029 federal MCL").
EPA: "UCMR 5 results do not indicate compliance or noncompliance with the PFAS drinking water standards". Samples are taken where water enters the distribution system, not at your tap. A system may have changed sources or added treatment since. Source: U.S. Environmental Protection Agency (EPA), Office of Water, PFAS National Primary Drinking Water Regulation (NPDWR). Regulation details retrieved September 19, 2026. Every system page tracks the 2029 compliance date and the proposed rescission of the PFHxS, PFNA, HFPO-DA and Hazard Index limits.
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.