PFAS in Villoncourt's tap water: no test result published yet

Last check: · Source: Hub'eau

PFAS in drinking water

No PFAS results have been published for Villoncourt yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

No PFAS test published yet. Sign up below and we will tell you when the first one is out.

Latest water check
30 July 2026
Water supplier
SAUR

No PFAS result is published for Villoncourt in the data retrieved on 21 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 30 July 2026.

Details and sources
Water supplier: SAUR Latest water check: 30 July 2026 Data updated on

What the latest check found

At the latest check, the water was within every limit tested.

Microbiology: within the limit Chemistry: within the limit

Values to watch

These results are close to their legal limit, or over it.

Outside a reference value: Sulphate 260 mg/L on 30 July 2026 (reference ≤ 250 mg/L). These are indicator parameters with reference values, not legal limits.

What was tested Value Limit Status
Sulphate 260 mg/L ≤ 250 mg/L above the reference value
See all 12 test results
What was tested Value Limit Status
Nitrate 2.8 mg/L ≤ 50 mg/L within the limit
Nitrite <0,01 mg/L ≤ 0.5 mg/L within the limit
Cadmium <0,01 µg/L ≤ 5 µg/L within the limit
Chromium 0.09 µg/L ≤ 50 µg/L within the limit
Escherichia coli <1 n/(100mL) ≤ 0 mL) within the limit
Enterococci <1 n/(100mL) ≤ 0 mL) within the limit
Coliform bacteria <1 n/(100mL) ≤ 0 mL) within the limit
pH 7.3 unité pH 6.5–9 unité pH within the limit
Electrical conductivity 790 µS/cm 200–1,100 µS/cm within the limit
Chloride 11 mg/L ≤ 250 mg/L within the limit
Sulphate 260 mg/L ≤ 250 mg/L above the reference value
Turbidity 0.3 NFU ≤ 2 NFU within the limit

Frequently asked questions

Is tap water in Villoncourt safe to drink?

Yes. At the check on 30 July 2026, the tap water in Villoncourt was within every limit tested. Outside a reference value: Sulphate 260 mg/L on 30 July 2026 (reference ≤ 250 mg/L). These are indicator parameters with reference values, not legal limits. “Eau d'alimentation ne satisfaisant pas à la référence de qualité réglementaire pour le paramètre sulfates. En raison d'éventuels effets laxatifs l'utilisation de cette eau est déconseillée pour les nourrissons (pour la boisson et la préparation des aliments). Les mesures correctives nécessaires doivent être prises afin de rétablir la qualité de l'eau. Un contrôle renforcé est mis en place, il pourra inclure des analyses de métaux en raison de l'accentuation des phénomènes de corrosion des installations de distribution en présence des sulfates.”

How high are PFAS levels in Villoncourt's drinking water?

No PFAS results have been published for Villoncourt yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Villoncourt?

No hardness value is available for Villoncourt in this source.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.

Same water network

Same distribution network as Villoncourt, so in principle the same water.

Nearby communes

The closest to Villoncourt on this site.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=88509
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
21 September 2026
Supply networks
SDE NOMEXY

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.