PFAS in Tence's tap water: no test result published yet
Last check: · Source: Hub'eau
PFAS in drinking water
No PFAS results have been published for Tence yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
No PFAS test published yet. Sign up below and we will tell you when the first one is out.
Water report for Tence
Get new PFAS results for Tence, with a short explanation. At most one update a week, only when there's something new.
- Latest water check
- 22 July 2026
- Water supplier
- SIAEP DE TENCE
No PFAS result is published for Tence in the data retrieved on 21 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 22 July 2026.
Details and sources
What the latest check found
At the latest check, the water was within every limit tested.
See all 20 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 1.9 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | 0.02 mg/L | ≤ 0.5 mg/L | within the limit |
| Lead | 0.1 µg/L | ≤ 10 µg/L | within the limit |
| Copper | 0.0271 mg(Cu)/L | ≤ 2 mg(Cu)/L | within the limit |
| Nickel | 1.3 µg/L | ≤ 20 µg/L | within the limit |
| Arsenic | 0.21 µg/L | ≤ 10 µg/L | within the limit |
| Cadmium | 0.02 µg/L | ≤ 5 µg/L | within the limit |
| Chromium | 0.24 µg/L | ≤ 50 µg/L | within the limit |
| Fluoride | <0,1 mg/L | ≤ 1.5 mg/L | within the limit |
| Escherichia coli | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 7.8 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 7.9 °f | no limit | for reference |
| Electrical conductivity | 219 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 17 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 6.1 mg/L | ≤ 250 mg/L | within the limit |
| Sodium | 7.8 mg/L | ≤ 200 mg/L | within the limit |
| Iron | 1 µg/L | ≤ 200 µg/L | within the limit |
| Turbidity | <0,3 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Tence safe to drink?
Yes. At the check on 22 July 2026, the tap water in Tence was within every limit tested. “Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés.”
How high are PFAS levels in Tence's drinking water?
No PFAS results have been published for Tence yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Tence?
The water hardness in Tence is 7.9 °f (soft). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.
Same water network
Same distribution network as Tence, so in principle the same water.
Nearby communes
The closest to Tence on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=43244
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 21 September 2026
- Supply networks
- HOSTES
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.