Drinking water quality in Taden

Region: Bretagne Population: 2,636 Water supplier: SEMOP EAUX DE DINAN - EAU POTABLE Latest sample: 23 June 2026

PFAS in drinking water

No PFAS results have been published for Taden yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

Water report for Taden

Official assessment

The authorities have not published an overall verdict for this water.

„Eau d'alimentation non-conforme aux limites de qualité et conforme aux références de qualité. Ce contrôle confirme les résultats du prélèvement du 10/06/2026 , qui avait mis en évidence des résultats non satisfaisants sur le paramètre Chlorate . La valeur la plus faible possible de ce paramètre doit être visée sans pour autant compromettre la désinfection. La réglementation fixe une limite de qualité à 700 µg/l lorsqu'une méthode de désinfection des eaux destinées à la consommation humaine qui génère des chlorates est utilisée. Au delà de cette valeur, il est recommandé de ne pas consommer cette eau, une restriction d'usage est nécessaire. La présence de chlorates peut avoir pour origine la présence d'impuretés dans le désinfectant employé (javel, hypochlorite de calcium ...), dans ce cas la limite de qualité est fixée à 250 µg/l. Il convient, pour respecter cette exigence, de veiller à la pureté des réactifs employés ainsi qu'à leur condition de stockage et d'emploi (dosage, utilisation sous 3 mois après la livraison). Compte tenu de la teneur mesurée en chlorates sur ce prélèvement, un suivi renforcé sera mis en place sur ce paramètre.“

Microbiology: not assessed Chemistry: within limit

Values to watch

These values are at least halfway to their legal limit, or over it.

Parameter Value Limit Status
Nitrate 34 mg/L ≤ 50 mg/L within limit
Show all 12 official measurements
Parameter Value Limit Status
Nitrate 34 mg/L ≤ 50 mg/L within limit
Nitrite <0,01 mg/L ≤ 0.5 mg/L within limit
Cadmium <0,025 µg/L ≤ 5 µg/L within limit
Chromium <0,5 µg/L ≤ 50 µg/L within limit
Escherichia coli 0 n/(100mL) ≤ 0 mL) within limit
Enterococci 0 n/(100mL) ≤ 0 mL) within limit
Coliform bacteria 0 n/(100mL) ≤ 0 mL) within limit
pH 7.9 unité pH 6.5–9 unité pH within limit
Water hardness 20 °f no limit informational
Electrical conductivity 504 µS/cm 200–1,100 µS/cm within limit
Iron 7.3 µg/L ≤ 200 µg/L within limit
Turbidity 0.25 NFU ≤ 2 NFU within limit

See the full results

See every official test result for Taden, including each PFAS substance. Free, just leave your email.

Frequently asked questions

Is tap water in Taden safe to drink?

All the values shown here (23 June 2026) are within the legal limits, but the authorities have not published an overall verdict for this water.

How high are PFAS levels in Taden's drinking water?

No PFAS results have been published for Taden yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Taden?

The water hardness in Taden is 20 °f (medium). This mainly matters for household appliances and detergent dosing, not for health.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 28 August 2026.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=22339
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
28 August 2026
Supply networks
DISTRICT URBAIN DE DINAN

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.