PFAS in Sempy's tap water: no test result published yet
Last check: · Source: Hub'eau
PFAS in drinking water
No PFAS results have been published for Sempy yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
No PFAS test published yet. Sign up below and we will tell you when the first one is out.
Water report for Sempy
Get new PFAS results for Sempy, with a short explanation. At most one update a week, only when there's something new.
- Latest water check
- 4 June 2026
- Water supplier
- SUEZ EAU FRANCE - DUNKERQUE
No PFAS result is published for Sempy in the data retrieved on 12 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 4 June 2026.
Details and sources
What the latest check found
At the latest check, the water was within every limit tested.
Values to watch
These results are close to their legal limit, or over it.
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 30.7 mg/L | ≤ 50 mg/L | within the limit |
See all 16 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 30.7 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,01 mg/L | ≤ 0.5 mg/L | within the limit |
| Lead | <2 µg/L | ≤ 10 µg/L | within the limit |
| Copper | 0.029 mg/L | ≤ 2 mg/L | within the limit |
| Nickel | <5 µg/L | ≤ 20 µg/L | within the limit |
| Cadmium | <1 µg/L | ≤ 5 µg/L | within the limit |
| Chromium | <5 µg/L | ≤ 50 µg/L | within the limit |
| Escherichia coli | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 7.4 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 31.36 °f | no limit | for reference |
| Electrical conductivity | 669 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 22.3 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 9.4 mg/L | ≤ 250 mg/L | within the limit |
| Turbidity | <0,1 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Sempy safe to drink?
Yes. At the check on 4 June 2026, the tap water in Sempy was within every limit tested. “Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés.”
How high are PFAS levels in Sempy's drinking water?
No PFAS results have been published for Sempy yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Sempy?
The water hardness in Sempy is 31.4 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 12 September 2026.
Same water network
Same distribution network as Sempy, so in principle the same water.
Nearby communes
The closest to Sempy on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=62787
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 12 September 2026
- Supply networks
- BRIMEUX
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.