PFAS in Pithon's tap water: no test result published yet
Last check: · Source: Hub'eau
PFAS in drinking water
No PFAS results have been published for Pithon yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
Fails a current legal limit. The details are below.
Water report for Pithon
Get new PFAS results for Pithon, with a short explanation. At most one update a week, only when there's something new.
- Latest water check
- 6 March 2026
- Water supplier
- MAIRIE DE PITHON
No PFAS result is published for Pithon in the data retrieved on 12 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 6 March 2026.
Details and sources
What the latest check found
At the latest check, the water was over at least one limit.
Values to watch
These results are close to their legal limit, or over it.
Outside a reference value: Coliform bacteria 3 n/(100mL) on 24 February 2026 (reference ≤ 0 mL)). These are indicator parameters with reference values, not legal limits.
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 31.3 mg/L | ≤ 50 mg/L | within the limit |
| Coliform bacteria | 3 n/(100mL) | ≤ 0 mL) | above the reference value |
See all 11 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 31.3 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,010 mg/L | ≤ 0.5 mg/L | within the limit |
| Escherichia coli | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | 3 n/(100mL) | ≤ 0 mL) | above the reference value |
| pH | 7.3 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 41.3 °f | no limit | for reference |
| Electrical conductivity | 840 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 29.7 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 43.1 mg/L | ≤ 250 mg/L | within the limit |
| Turbidity | <0,30 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Pithon safe to drink?
At the latest check, the water was over at least one limit. “Eau d’alimentation non conforme aux limites de qualité en vigueur pour les paramètres desphénylchloridazone et méthyl-desphénylchloridazone et présentant des dépassements de la valeur indicative de 0,9 µg/L pou r le paramètre Chlorothalonil R471811. Toutefois, cette eau est propre à la consommation humaine car la concentration des paramètres desphén ylchloridazone et méthyl-desphénylchloridazone reste inférieure aux va leurs sanitaires. Un contrôle renforcé est mis en place.”
How high are PFAS levels in Pithon's drinking water?
No PFAS results have been published for Pithon yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Pithon?
The water hardness in Pithon is 41.3 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 12 September 2026.
Nearby communes
The closest to Pithon on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=02604
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 12 September 2026
- Supply networks
- PITHON
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.