PFAS in Pino's tap water: no test result published yet

Last check: · Source: Hub'eau

Fails the current legal limits

PFAS in drinking water

No PFAS results have been published for Pino yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

Fails a current legal limit. The details are below.

Latest water check
23 June 2026
Water supplier
MAIRIE DE PINO

No PFAS result is published for Pino in the data retrieved on 12 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 23 June 2026.

Details and sources
Water supplier: MAIRIE DE PINO Latest water check: 23 June 2026 Data updated on

What the latest check found

At the latest check, the water was over at least one limit.

Microbiology: over the limit Chemistry: within the limit

Values to watch

These results are close to their legal limit, or over it.

Outside a reference value: Coliform bacteria 4 n/(100mL) on 23 June 2026 (reference ≤ 0 mL)). These are indicator parameters with reference values, not legal limits.

What was tested Value Limit Status
Escherichia coli 4 n/(100mL) ≤ 0 mL) over the limit
Enterococci 8 n/(100mL) ≤ 0 mL) over the limit
Coliform bacteria 4 n/(100mL) ≤ 0 mL) above the reference value
See all 19 test results
What was tested Value Limit Status
Nitrate <1 mg/L ≤ 50 mg/L within the limit
Nitrite <0,05 mg/L ≤ 0.5 mg/L within the limit
Lead <2 µg/L ≤ 10 µg/L within the limit
Copper 0.009 mg(Cu)/L ≤ 2 mg(Cu)/L within the limit
Nickel 4 µg/L ≤ 20 µg/L within the limit
Arsenic <2 µg/L ≤ 10 µg/L within the limit
Cadmium <1 µg/L ≤ 5 µg/L within the limit
Chromium 13 µg/L ≤ 50 µg/L within the limit
Fluoride <0,05 mg/L ≤ 1.5 mg/L within the limit
Escherichia coli 4 n/(100mL) ≤ 0 mL) over the limit
Enterococci 8 n/(100mL) ≤ 0 mL) over the limit
Coliform bacteria 4 n/(100mL) ≤ 0 mL) above the reference value
pH 7.67 unité pH 6.5–9 unité pH within the limit
Water hardness 36.44 °f no limit for reference
Electrical conductivity 841 µS/cm 200–1,100 µS/cm within the limit
Chloride 73 mg/L ≤ 250 mg/L within the limit
Sulphate 33 mg/L ≤ 250 mg/L within the limit
Sodium 21.5 mg/L ≤ 200 mg/L within the limit
Turbidity 0.21 NFU ≤ 2 NFU within the limit

Frequently asked questions

Is tap water in Pino safe to drink?

At the latest check, the water was over at least one limit. “Eau d'alimentation non-conforme aux exigences de qualité. Présence de germes témoins de contamination fécale. La teneur en chlore libre est insuffisante.”

How high are PFAS levels in Pino's drinking water?

No PFAS results have been published for Pino yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Pino?

The water hardness in Pino is 36.4 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 12 September 2026.

Nearby communes

The closest to Pino on this site.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=2B233
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
12 September 2026
Supply networks
PINO SOPRANO-LAVONESE-SERRA, METIMO-TAGLIATO-STAZ -COVILI-PERI, CASUCCIO-MARINE-RAFFALACCE(ETE)

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.