PFAS in Naussac-Fontanes's tap water: no test result published yet

Last check: · Source: Hub'eau

PFAS in drinking water

No PFAS results have been published for Naussac-Fontanes yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

No PFAS test published yet. Sign up below and we will tell you when the first one is out.

Latest water check
29 June 2026
Water supplier
SAUR VALLÉE DU RHÔNE

No PFAS result is published for Naussac-Fontanes in the data retrieved on 12 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 29 June 2026.

Details and sources
Water supplier: SAUR VALLÉE DU RHÔNE Latest water check: 29 June 2026 Data updated on

What the latest check found

At the latest check, the water was within every limit tested.

Microbiology: within the limit Chemistry: within the limit

Values to watch

These results are close to their legal limit, or over it.

Outside a reference value: Electrical conductivity 77 µS/cm on 29 June 2026 (reference 200–1,100 µS/cm). These are indicator parameters with reference values, not legal limits.

What was tested Value Limit Status
Electrical conductivity 77 µS/cm 200–1,100 µS/cm below the reference value
See all 17 test results
What was tested Value Limit Status
Nitrate 4.9 mg/L ≤ 50 mg/L within the limit
Nitrite <0,01 mg/L ≤ 0.5 mg/L within the limit
Lead <0,5 µg/L ≤ 10 µg/L within the limit
Copper 0.0243 mg(Cu)/L ≤ 2 mg(Cu)/L within the limit
Nickel <1 µg/L ≤ 20 µg/L within the limit
Cadmium <0,1 µg/L ≤ 5 µg/L within the limit
Chromium 1 µg/L ≤ 50 µg/L within the limit
Escherichia coli 0 n/(100mL) ≤ 0 mL) within the limit
Enterococci 0 n/(100mL) ≤ 0 mL) within the limit
Coliform bacteria 0 n/(100mL) ≤ 0 mL) within the limit
pH 7.3 unité pH 6.5–9 unité pH within the limit
Water hardness 2.3 °f no limit for reference
Electrical conductivity 77 µS/cm 200–1,100 µS/cm below the reference value
Chloride 2.3 mg/L ≤ 250 mg/L within the limit
Sulphate 1.4 mg/L ≤ 250 mg/L within the limit
Iron 7 µg/L ≤ 200 µg/L within the limit
Turbidity <0,2 NFU ≤ 2 NFU within the limit

Frequently asked questions

Is tap water in Naussac-Fontanes safe to drink?

Yes. At the check on 29 June 2026, the tap water in Naussac-Fontanes was within every limit tested. Outside a reference value: Electrical conductivity 77 µS/cm on 29 June 2026 (reference 200–1,100 µS/cm). These are indicator parameters with reference values, not legal limits. “Eau d'alimentation conforme aux limites de qualité et non conforme aux références de qualité.”

How high are PFAS levels in Naussac-Fontanes's drinking water?

No PFAS results have been published for Naussac-Fontanes yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Naussac-Fontanes?

The water hardness in Naussac-Fontanes is 2.3 °f (soft). This mainly matters for household appliances and detergent dosing, not for health.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 12 September 2026.

Same water network

Same distribution network as Naussac-Fontanes, so in principle the same water.

Nearby communes

The closest to Naussac-Fontanes on this site.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=48105
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
12 September 2026
Supply networks
LANGOGNE LES LOMBARDS - LA CLAMOUSE

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.