Drinking water quality in Loury

Region: Centre-Val de Loire Population: 2,616 Water supplier: SUEZ SECTEUR BEAUGENCY Latest sample: 22 June 2026

PFAS in drinking water

No PFAS results have been published for Loury yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

Water report for Loury

Official assessment

The latest official test passed all quality requirements.

„Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés. Les teneurs en plomb, cuivre et nickel ne valent que pour le point d'utilisation où elles ont été respectivement mesurées. Compte tenu de l'influence du réseau de distribution d'eau (réseau intérieur et éventuellement branchement public) sur la dissolution des métaux, ces valeurs ne sont pas représentatives de la qualité de l'eau pour l'ensemble des consommateurs du réseau de distribution (circulaire DGS/SD7A n°45 du 5 février 2004).“

Microbiology: within limit Chemistry: within limit

Values to watch

These values are at least halfway to their legal limit, or over it.

Parameter Value Limit Status
Arsenic 5.8 µg/L ≤ 10 µg/L within limit
Show all 17 official measurements
Parameter Value Limit Status
Nitrate <0,50 mg/L ≤ 50 mg/L within limit
Nitrite <0,01 mg/L ≤ 0.5 mg/L within limit
Lead <2 µg/L ≤ 10 µg/L within limit
Nickel <5 µg/L ≤ 20 µg/L within limit
Arsenic 5.8 µg/L ≤ 10 µg/L within limit
Cadmium <1 µg/L ≤ 5 µg/L within limit
Chromium <5 µg/L ≤ 50 µg/L within limit
Escherichia coli <1 n/(100mL) ≤ 0 mL) within limit
Enterococci <1 n/(100mL) ≤ 0 mL) within limit
Coliform bacteria <1 n/(100mL) ≤ 0 mL) within limit
pH 7.5 unité pH 6.5–9 unité pH within limit
Water hardness 32.06 °f no limit informational
Electrical conductivity 631 µS/cm 200–1,100 µS/cm within limit
Chloride 17.7 mg/L ≤ 250 mg/L within limit
Sulphate 29 mg/L ≤ 250 mg/L within limit
Iron <10 µg/L ≤ 200 µg/L within limit
Turbidity <0,10 NFU ≤ 2 NFU within limit

See the full results

See every official test result for Loury, including each PFAS substance. Free, just leave your email.

Frequently asked questions

Is tap water in Loury safe to drink?

Yes. The latest official test (22 June 2026) checked the tap water in Loury and it passed every requirement.

How high are PFAS levels in Loury's drinking water?

No PFAS results have been published for Loury yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Loury?

The water hardness in Loury is 32.06 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 28 August 2026.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=45188
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
28 August 2026
Supply networks
TRAINOU - LOURY, LOURY (ABA)

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.