PFAS in Charpentry's tap water: no test result published yet
Last check: · Source: Hub'eau
PFAS in drinking water
No PFAS results have been published for Charpentry yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
Fails a current legal limit. The details are below.
Water report for Charpentry
Get new PFAS results for Charpentry, with a short explanation. At most one update a week, only when there's something new.
- Latest water check
- 23 July 2026
- Water supplier
- SIAEP DE LA COTE BADARD
No PFAS result is published for Charpentry in the data retrieved on 21 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 23 July 2026.
Details and sources
What the latest check found
At the latest check, the water was over at least one limit.
See all 15 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 23 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,01 mg/L | ≤ 0.1 mg/L | within the limit |
| Arsenic | 0.7 µg/L | ≤ 10 µg/L | within the limit |
| Fluoride | 0.29 mg/L | ≤ 1.5 mg/L | within the limit |
| Escherichia coli | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 7.2 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 39.1 °f | no limit | for reference |
| Electrical conductivity | 780 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 15 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 55 mg/L | ≤ 250 mg/L | within the limit |
| Sodium | 8.9 mg/L | ≤ 200 mg/L | within the limit |
| Iron | 74 µg/L | ≤ 200 µg/L | within the limit |
| Turbidity | 0.6 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Charpentry safe to drink?
At the latest check, the water was over at least one limit. “Eau d'alimentation respectant les exigences de qualité réglementaires en vigueur pour les paramètres microbiologiques analysés. Eau d'alimentation non conforme à la limite de qualité réglementaire pour le paramètre Chlorates (sous-produit de désinfection). Le responsable de la distribution de l'eau a été informé de cette situation et invité à procéder aux vérifications, et, le cas échéant, aux corrections nécessaires par courriel le 10/08/2026. Une analyse de recontrôle sera réalisée prochainement.”
How high are PFAS levels in Charpentry's drinking water?
No PFAS results have been published for Charpentry yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Charpentry?
The water hardness in Charpentry is 39.1 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.
Same water network
Same distribution network as Charpentry, so in principle the same water.
Nearby communes
The closest to Charpentry on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=55103
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 21 September 2026
- Supply networks
- SIAEP DE LA COTE BADARD
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.