PFAS in the tap water of Brie (Ille-et-Vilaine): under 3.4 ng/L, none of the four main PFAS detected
Last PFAS check: · Source: Hub'eau
PFAS in drinking water
None of the 4 most harmful PFAS detected
The lab sees nothing below 3.4 ng/L, 6.8 times our benchmark of 0.5 ng/L. Water above our benchmark would pass this check unnoticed.
0.5 ng/L is our benchmark, not an official limit. Same EFSA method as Sweden, Denmark and the Netherlands, but stricter. It's a yearly average, compared here with the latest check.
More about this result
The US also limits PFOA and PFOS to 4 ng/L each, per substance.
The lab detects each of the four substances from 0.4 to 1 ng/L upward. None reached that limit, so their total is below 3.4 ng/L rather than zero.
checked on 7 July 2026
20 PFAS (see each substance)
| PFAS substance | Value |
|---|---|
| Acide perfluorohexanoïque (PFHXA) | 0.0014 µg/L |
| Acide perfluoropentane sulfonique (PFPS) | <0,00040 µg/L |
| Acide perfluoro tridecanoique (PFTrDA) | <0,0010 µg/L |
| Acide perfluoro tridecane sulfonique (PFTrDS) | <0,00040 µg/L |
| Acide perfluorononane sulfonique (PFNS) | <0,00040 µg/L |
| Acide perfluoro-decanoïque (PFDA) | <0,0010 µg/L |
| Acide perfluorododécane sulfonique (PFDoDS) | <0,00040 µg/L |
| Acide perfluoro-octanoïque (PFOA) | <0,0010 µg/L |
| Acide perfluoropentanoïque (PFPEA) | <0,0050 µg/L |
| Acide perfluoro-nonanoïque (PFNA) | <0,0010 µg/L |
| Acide perfluorobutanoïque (PFBA) | <0,0050 µg/L |
| Acide perfluoroheptanoïque (PFHPA) | <0,0010 µg/L |
| Acide perfluorodecane sulfonique (PFDS) | <0,00040 µg/L |
| Acide perfluoro undecanoïque (PFUnA) | <0,0010 µg/L |
| Perfluorohexane sulfonate (PFHXS) | <0,00040 µg/L |
| Acide perfluorododécanoique (PFDoDA) | <0,0010 µg/L |
| Acide perfluoro undecane sulfonique (PFUnDS) | <0,00040 µg/L |
| Acide sulfonique de perfluorobutane (PFBS) | <0,00040 µg/L |
| Acide perfluoroheptane sulfonique (PFHpS) | <0,00040 µg/L |
| Acide sulfonique de perfluorooctane (PFOS) | <0,0010 µg/L |
None found. The lab sees nothing below 3.4 ng/L, so our 0.5 ng/L benchmark cannot be checked.
Water report for Brie
Get new PFAS results for Brie, with a short explanation. At most one update a week, only when there's something new.
- EU legal limit
- 1.4 ng/L sum of 20 PFAS, below the 100 ng/L limit
- Last PFAS test
- 7 July 2026
- Water supplier
- AQUALIA
In Brie, none of the 4 most closely watched PFAS (PFAS-4) was detected at the latest PFAS check on 7 July 2026. The total is below 3.4 ng/L, the sum of the detection limits and 6.8 times our 0.5 ng/L benchmark. Sum of 20 PFAS: 1.4 ng/L (0.0014 µg/L), below the EU legal limit (100 ng/L). 4 checks since 30 July 2025: PFAS-4 up to 1 ng/L, sometimes below the detection limit, averaging at least 0.25 ng/L over 12 months (non-detects as 0). Source: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM).
Details and sources
PFAS over time in Brie
5 PFAS checks since 25 March 2025, from the published measurements. Samples from 3 communes on the same network: it's the same water, so each one applies to Brie.
“Calculated”: PFAS-4 worked out from the four substances in the same sample. The chart, averages and trends use lab-published sums only.
| Date | PFAS-4 | Sum of 20 PFAS | Sampled at |
|---|---|---|---|
| < detection limit | 1.4 ng/L | Brie | |
| 1 ng/L | 4.73 ng/L | Amanlis | |
| < detection limit | < detection limit | Vitré | |
| < detection limit | < detection limit | Vitré | |
| < 3.4 ng/L · calculated | < detection limit | Vitré |
Calculated values: “<” is an upper bound from published thresholds, “≥” a lower bound, “–” means no published sum or complete measurement. How to read a PFAS result
What the latest check found
The authorities have not published an overall verdict for this water.
See all 21 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 6.9 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,02 mg/L | ≤ 0.5 mg/L | within the limit |
| Lead | <1,0 µg/L | ≤ 10 µg/L | within the limit |
| Copper | 0.0074 mg(Cu)/L | ≤ 2 mg(Cu)/L | within the limit |
| Nickel | 1.9 µg/L | ≤ 20 µg/L | within the limit |
| Arsenic | <0,20 µg/L | ≤ 10 µg/L | within the limit |
| Cadmium | <0,025 µg/L | ≤ 5 µg/L | within the limit |
| Chromium | <1,0 µg/L | ≤ 50 µg/L | within the limit |
| Uranium | <0,50 µg/L | ≤ 30 µg/L | within the limit |
| Fluoride | 0.084 mg/L | ≤ 1.5 mg/L | within the limit |
| Escherichia coli | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 8.2 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 17.3 °f | no limit | for reference |
| Electrical conductivity | 545 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 69.9 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 74.4 mg/L | ≤ 250 mg/L | within the limit |
| Sodium | 32.6 mg/L | ≤ 200 mg/L | within the limit |
| Iron | <20 µg/L | ≤ 200 µg/L | within the limit |
| Turbidity | <0,20 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Brie safe to drink?
All the values shown here (21 July 2026) are within the legal limits, but the authorities have not published an overall verdict for this water. “Ce prélèvement a été réalisé dans le cadre du contrôle renforcé mis en œuvre sur ce secteur de distribution afin de suivre l’évolution de la qualité de l’eau vis-à-vis du paramètre Chlorate. Les analyses réalisées ont mis en évidence la présence de chlorates. La réglementation fixe une limite de qualité à 700 µg/l pour ce paramètre, lorsqu'une méthode de désinfection des eaux destinées à la consommation humaine qui en génére est utilisée. Au delà de cette valeur, il est recommandé de ne pas consommer cette eau, une restriction d'usage est nécessaire. La valeur la plus faible possible de ce paramètre doit être visée sans pour autant compromettre la désinfection.”
How high are PFAS levels in Brie's drinking water?
The total of 20 PFAS ("forever chemicals") was last measured at 1.4 ng/L. The EU limit is 100 ng/L, so this water is at 1 % of the limit. (below the EU limit)
Does the water in Brie also meet the strictest limits in Europe?
As far as this check can tell, yes. None of the four compounds was quantified, so their total is below 3.4 ng/L, the sum of the laboratory's detection limits, and under Sweden's legal limit of 4 ng/L in force since 2026.
Are PFAS levels rising in Brie's tap water?
Too few quantified checks to say (1 since 25 March 2025). pfasnearme adds each new publication weekly; a trend needs at least three quantified values. These history statistics use laboratory-published sums only.
How hard is the water in Brie?
The water hardness in Brie is 17.3 °f (medium). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.
Same water network
Same distribution network as Brie, so in principle the same water.
Nearby communes
The closest to Brie on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=35041
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 21 September 2026
- Supply networks
- FORET THEIL_BILLERIE/GROUSSINIERE_JANZE
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.