PFAS in the tap water of Brassac (Ariège): no test result published yet

Last check: · Source: Hub'eau

Fails the current legal limits

PFAS in drinking water

No PFAS results have been published for Brassac yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.

Fails a current legal limit. The details are below.

Latest water check
22 July 2026
Water supplier
S.M.D.E.A

No PFAS result is published for Brassac in the data retrieved on 21 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 22 July 2026.

Details and sources
Water supplier: S.M.D.E.A Latest water check: 22 July 2026 Data updated on

What the latest check found

At the latest check, the water was over at least one limit.

Microbiology: no verdict Chemistry: over the limit

Values to watch

These results are close to their legal limit, or over it.

Outside a reference value: Electrical conductivity 33 µS/cm on 22 July 2026 (reference 200–1,100 µS/cm). These are indicator parameters with reference values, not legal limits.

What was tested Value Limit Status
Electrical conductivity 33 µS/cm 200–1,100 µS/cm below the reference value
See all 18 test results
What was tested Value Limit Status
Nitrate 1.4 mg/L ≤ 50 mg/L within the limit
Nitrite <0,050 mg/L ≤ 0.5 mg/L within the limit
Copper 0.066 mg(Cu)/L ≤ 2 mg(Cu)/L within the limit
Arsenic 0.82 µg/L ≤ 10 µg/L within the limit
Cadmium <0,50 µg/L ≤ 5 µg/L within the limit
Chromium <0,50 µg/L ≤ 50 µg/L within the limit
Fluoride <0,050 mg/L ≤ 1.5 mg/L within the limit
Escherichia coli 0 n/(100mL) ≤ 0 mL) within the limit
Enterococci 0 n/(100mL) ≤ 0 mL) within the limit
Coliform bacteria 0 n/(100mL) ≤ 0 mL) within the limit
pH 6.6 unité pH 6.5–9 unité pH within the limit
Water hardness <0,50 °f no limit for reference
Electrical conductivity 33 µS/cm 200–1,100 µS/cm below the reference value
Chloride 1.7 mg/L ≤ 250 mg/L within the limit
Sulphate 1.5 mg/L ≤ 250 mg/L within the limit
Sodium 3.09 mg/L ≤ 200 mg/L within the limit
Iron <5,00 µg/L ≤ 200 µg/L within the limit
Turbidity 0.2 NFU ≤ 2 NFU within the limit

Frequently asked questions

Is tap water in Brassac safe to drink?

At the latest check, the water was over at least one limit. “Présence de chlorure de vinyle monomère (CVM) à une concentration supérieure à la limite de qualité réglementaire (0,5 µg/l). Vérifier le fonctionnement de la purge automatique. Pour rappel, cette solution n'a pas vocation à être maintenue et le remplacement des canalisations en PVC posée avant 1980 doit être envisagée sans délais. Un prochain prélèvement réalisé dans le cadre de la surveillance renforcé est programmé.”

How high are PFAS levels in Brassac's drinking water?

No PFAS results have been published for Brassac yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.

How hard is the water in Brassac?

The water hardness in Brassac is 0 °f (soft). This mainly matters for household appliances and detergent dosing, not for health.

Where does this data come from?

All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.

Same water network

Same distribution network as Brassac, so in principle the same water.

Nearby communes

The closest to Brassac on this site.

Data source

Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=09066
License
Licence Ouverte / Open Licence (Etalab)
Retrieved
21 September 2026
Supply networks
BOURGAIL, PLA DE RANS, LA BARGUILLERE, LEGRILLOU

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.