PFAS in Belleherbe's tap water: no test result published yet
Last check: · Source: Hub'eau
PFAS in drinking water
No PFAS results have been published for Belleherbe yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
"Not published" does not mean "not present". Without test results, no one can say how much PFAS is in this water.
Fails a current legal limit. The details are below.
Water report for Belleherbe
Get new PFAS results for Belleherbe, with a short explanation. At most one update a week, only when there's something new.
- Latest water check
- 20 April 2026
- Water supplier
- SIVU DES EAUX DE FROIDEFONTAINE
No PFAS result is published for Belleherbe in the data retrieved on 12 September 2026 (Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)). PFAS testing of drinking water has been mandatory across the EU since January 2026. The latest published check dates from 20 April 2026.
Details and sources
What the latest check found
At the latest check, the water was within every limit tested.
Values to watch
These results are close to their legal limit, or over it.
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Copper | 2.6 mg(Cu)/L | ≤ 2 mg(Cu)/L | over the limit |
See all 20 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 7.4 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,01 mg/L | ≤ 0.5 mg/L | within the limit |
| Lead | 3.2 µg/L | ≤ 10 µg/L | within the limit |
| Copper | 2.6 mg(Cu)/L | ≤ 2 mg(Cu)/L | over the limit |
| Nickel | <1,0 µg/L | ≤ 20 µg/L | within the limit |
| Arsenic | <1,0 µg/L | ≤ 10 µg/L | within the limit |
| Cadmium | <0,025 µg/L | ≤ 5 µg/L | within the limit |
| Chromium | <1,0 µg/L | ≤ 50 µg/L | within the limit |
| Fluoride | <0,10 mg/L | ≤ 1.5 mg/L | within the limit |
| Escherichia coli | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | 0 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 7.6 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 27.3 °f | no limit | for reference |
| Electrical conductivity | 507 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 3.8 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 6.4 mg/L | ≤ 250 mg/L | within the limit |
| Sodium | 2.6 mg/L | ≤ 200 mg/L | within the limit |
| Iron | <20 µg/L | ≤ 200 µg/L | within the limit |
| Turbidity | <0,20 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Belleherbe safe to drink?
At the latest check, the water was over at least one limit. “Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés.”
How high are PFAS levels in Belleherbe's drinking water?
No PFAS results have been published for Belleherbe yet. Testing has been required across the EU since January 2026. We will show the values here as soon as they come out.
How hard is the water in Belleherbe?
The water hardness in Belleherbe is 27.3 °f (medium). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 12 September 2026.
Same water network
Same distribution network as Belleherbe, so in principle the same water.
Nearby communes
The closest to Belleherbe on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=25051
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 12 September 2026
- Supply networks
- SIVU DE FROIDEFONTAINE
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.