PFAS in Arthel's tap water: under 4 ng/L, none of the four main PFAS detected
Last PFAS check: · Source: Hub'eau
PFAS in drinking water
No PFAS detected
The lab sees nothing below 4 ng/L, 8 times our benchmark of 0.5 ng/L. Water above our benchmark would pass this check unnoticed.
0.5 ng/L is our benchmark, not an official limit. Same EFSA method as Sweden, Denmark and the Netherlands, but stricter. It's a yearly average, compared here with the latest check.
Sample taken in Giry, on the same distribution network as Arthel (GIRY). The health authority samples one tap per network; a network carries the same treated water everywhere.
More about this result
The US also limits PFOA and PFOS to 4 ng/L each, per substance.
The lab detects each of the four substances from 1 ng/L upward. None reached that limit, so their total is below 4 ng/L rather than zero.
checked on 8 June 2026
20 PFAS (see each substance)
| PFAS substance | Value |
|---|---|
| Acide perfluoropentane sulfonique (PFPS) | <0,001 µg/L |
| Acide perfluoro-nonanoïque (PFNA) | <0,001 µg/L |
| Acide perfluoro-decanoïque (PFDA) | <0,001 µg/L |
| Acide perfluorobutanoïque (PFBA) | <0,002 µg/L |
| Acide perfluoro undecanoïque (PFUnA) | <0,001 µg/L |
| Acide perfluorododécanoique (PFDoDA) | <0,001 µg/L |
| Perfluorohexane sulfonate (PFHXS) | <0,001 µg/L |
| Acide perfluoro tridecanoique (PFTrDA) | <0,001 µg/L |
| Acide perfluoroheptane sulfonique (PFHpS) | <0,002 µg/L |
| Acide perfluorononane sulfonique (PFNS) | <0,002 µg/L |
| Acide perfluorodecane sulfonique (PFDS) | <0,001 µg/L |
| Acide perfluoro tridecane sulfonique (PFTrDS) | <0,005 µg/L |
| Acide perfluorododécane sulfonique (PFDoDS) | <0,001 µg/L |
| Acide perfluorohexanoïque (PFHXA) | <0,002 µg/L |
| Acide perfluoropentanoïque (PFPEA) | <0,001 µg/L |
| Acide perfluoroheptanoïque (PFHPA) | <0,001 µg/L |
| Acide perfluoro undecane sulfonique (PFUnDS) | <0,002 µg/L |
| Acide perfluoro-octanoïque (PFOA) | <0,001 µg/L |
| Acide sulfonique de perfluorooctane (PFOS) | <0,001 µg/L |
| Acide sulfonique de perfluorobutane (PFBS) | <0,001 µg/L |
Fails a current legal limit. The details are below.
Water report for Arthel
Get new PFAS results for Arthel, with a short explanation. At most one update a week, only when there's something new.
- EU legal limit
- none detected sum of 20 PFAS below the detection limit, limit 100 ng/L
- Last PFAS test
- 8 June 2026
- Water supplier
- S.A.U.R. PREMERY
In Arthel, none of the 4 most closely watched PFAS (PFAS-4) was detected at the latest PFAS check on 8 June 2026. The total is below 4 ng/L, the sum of the detection limits and 8 times our 0.5 ng/L benchmark. Sum of 20 PFAS: <0,029 µg/L, below the EU legal limit (100 ng/L). Sampled in Giry, on the same network. 2 checks since 20 June 2025, sum of 20 PFAS always below the detection limit (29 ng/L). Source: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM).
Details and sources
PFAS over time in Arthel
2 PFAS checks since 20 June 2025, from the published measurements.
“Calculated”: PFAS-4 worked out from the four substances in the same sample. The chart, averages and trends use lab-published sums only.
| Date | PFAS-4 | Sum of 20 PFAS | Sampled at |
|---|---|---|---|
| < 4 ng/L | < 29 ng/L | Giry | |
| < 4 ng/L · calculated | < 28 ng/L | Giry |
Calculated values: “<” is an upper bound from published thresholds, “≥” a lower bound, “–” means no published sum or complete measurement. How to read a PFAS result
What the latest check found
At the latest check, the water was over at least one limit.
See all 11 test results
| What was tested | Value | Limit | Status |
|---|---|---|---|
| Nitrate | 22.1 mg/L | ≤ 50 mg/L | within the limit |
| Nitrite | <0,01 mg/L | ≤ 0.5 mg/L | within the limit |
| Escherichia coli | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Enterococci | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| Coliform bacteria | <1 n/(100mL) | ≤ 0 mL) | within the limit |
| pH | 7.57 unité pH | 6.5–9 unité pH | within the limit |
| Water hardness | 34.21 °f | no limit | for reference |
| Electrical conductivity | 648 µS/cm | 200–1,100 µS/cm | within the limit |
| Chloride | 8.7 mg/L | ≤ 250 mg/L | within the limit |
| Sulphate | 16.4 mg/L | ≤ 250 mg/L | within the limit |
| Turbidity | <0,1 NFU | ≤ 2 NFU | within the limit |
Frequently asked questions
Is tap water in Arthel safe to drink?
At the latest check, the water was over at least one limit. “La valeur du paramètre S-metolachlore dépasse la limite de qualité de 0,1µg/L imposée par l’arrêté du 11 janvier 2007 relatif aux limites et références de qualité des eaux brutes et des eaux destinées à la cons ommation humaine mentionnées aux articles R.1321-2, R.1321-3, R.1321-7 et R 1321-38 du code de la santé publique. Une nouvelle analyse sera programmée prochainement pour ce paramètre. Les autres paramètres mesu rés répondent aux normes de potabilité.”
How high are PFAS levels in Arthel's drinking water?
At the latest check the total of 20 PFAS ("forever chemicals") was below the laboratory's reporting limit of 29 ng/L. The EU limit is 100 ng/L, so this water is under 29 % of the limit. (below the EU limit)
Does the water in Arthel also meet the strictest limits in Europe?
As far as this check can tell, yes. None of the four compounds was quantified, so their total is below 4 ng/L, the sum of the laboratory's detection limits, and under Sweden's legal limit of 4 ng/L in force since 2026.
Are PFAS levels rising in Arthel's tap water?
Calculated PFAS-4 values are listed in the table. The chart uses laboratory-published sum-of-20 results; there are too few laboratory-published PFAS-4 sums for the existing trend calculation.
How hard is the water in Arthel?
The water hardness in Arthel is 34.2 °f (hard). This mainly matters for household appliances and detergent dosing, not for health.
Where does this data come from?
All values come from official publications: Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM). Retrieved on 21 September 2026.
Same water network
Same distribution network as Arthel, so in principle the same water.
Nearby communes
The closest to Arthel on this site.
Data source
- Hub'eau, Qualité de l'eau potable (Ministère de la Santé / OFB / BRGM)
- https://hubeau.eaufrance.fr/api/v1/qualite_eau_potable/resultats_dis?code_commune=58013
- License
- Licence Ouverte / Open Licence (Etalab)
- Retrieved
- 21 September 2026
- Supply networks
- GIRY
This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.