PFAS in tap water, Middlesex County, New Jersey

12 of 15 water systems had PFAS-4 above our 0.5 ng/L benchmark at the latest sample. Highest: Monroe TWP Utility Department, 36.3 ng/L. 14 had PFOA or PFOS above the 4 ng/L federal MCL in at least one sample.

15 community water systems · 718,503 people served · newest sample December 8, 2025

Water systems in Middlesex County

Water system People served PFAS-4 at the latest sample Entry points Latest sample
Middlesex Water Company 233,376 6.5 ng/L above the 2029 federal MCL 3 August 13, 2024
Old Bridge MUA 68,000 6.9 ng/L above the 2029 federal MCL 4 February 6, 2024
New Brunswick W Dept 55,000 4.6 ng/L above the 2029 federal MCL 1 February 25, 2025
Perth Amboy Water Department 52,328 23.8 ng/L above the 2029 federal MCL 1 January 31, 2025
East Brunswick Water Utility 49,715 below the 3 to 4 ng/L reporting limit above the 2029 federal MCL in an earlier sample 1 November 13, 2023
South Brunswick TWP W Di 45,450 23 ng/L above the 2029 federal MCL 4 July 16, 2024
Sayreville W Dept 45,345 5.6 ng/L above the 2029 federal MCL 1 August 13, 2024
North Brunswick W Dept 43,905 below the 3 to 4 ng/L reporting limit 1 August 19, 2025
Monroe TWP Utility Department 36,000 36.3 ng/L above the 2029 federal MCL 6 September 12, 2024
Edison Water CO 35,000 4.9 ng/L above the 2029 federal MCL 2 June 12, 2024
South River W Dept 16,000 below the 3 to 4 ng/L reporting limit above the 2029 federal MCL in an earlier sample 2 September 16, 2024
Highland Park W Dept 14,000 5.4 ng/L above the 2029 federal MCL 1 March 12, 2025
Matawan Borough Water de 9,084 5.4 ng/L above the 2029 federal MCL 2 November 19, 2024
Spotswood W Dept 8,300 21.1 ng/L above the 2029 federal MCL 2 December 8, 2025
Milltown W Dept 7,000 6.3 ng/L above the 2029 federal MCL 1 December 17, 2024

Not sure which one is yours? The systems report their own service areas to EPA. Check your water bill or your utility's Consumer Confidence Report.

Cities and towns

ZIP codes in Middlesex County

Census ZIP code tabulation areas that overlap the county. A ZIP served by one system opens that system's page; a ZIP shared by several systems lists them.

How to read these numbers

We compare PFAS-4 (PFOA + PFOS + PFNA + PFHxS) with this site's 0.5 ng/L benchmark, the same line as on the European pages. UCMR 5 reporting limits are 3 to 4 ng/L. So any quantified PFAS-4 compound is above the benchmark, and a clean result reads "below the 3 to 4 ng/L reporting limit", never zero. The US legal limit is the 4 ng/L federal MCL for PFOA and PFOS, which systems must meet from April 26, 2029 ("above the 2029 federal MCL").

EPA: "UCMR 5 results do not indicate compliance or noncompliance with the PFAS drinking water standards". Samples are taken where water enters the distribution system, not at your tap. A system may have changed sources or added treatment since. Source: U.S. Environmental Protection Agency (EPA), Office of Water, PFAS National Primary Drinking Water Regulation (NPDWR). Regulation details retrieved September 19, 2026. Every system page tracks the 2029 compliance date and the proposed rescission of the PFHxS, PFNA, HFPO-DA and Hazard Index limits.

This site is a data project, not an official source. If in doubt, check with your water supplier or local authority.